Commercial Concrete Contractors in Amarillo, TX
Warehouse slabs, service-bay concrete, oil-industry containment pads, retail pad-sites, and equipment foundations across the Amarillo metro and Panhandle.
Call (806) 639-4999Get Your Free Quote
Amarillo Commercial Concrete Is a Different Job
Amarillo commercial concrete work is a different job from residential. Different mix specs, different reinforcement design, different tolerance requirements, different inspection cadence. Where a residential driveway ships in 6 hours and cures in 28 days, a 30,000 sqft warehouse floor is a multi-day pour with dowel baskets, laser-guided screed, and industrial hardener applications. Timeline discipline matters more than in residential — a missed pour date on a commercial site delays the general contractor, the tenant, and the utility hookups.
Amarillo has three commercial concrete markets that drive most of our work: retail and warehouse construction along I-40 and Loop 335, oil-services facilities in the surrounding Carson/Randall/Potter County oil-and-gas corridor, and healthcare/education campus work (BSA Health System, TTUHSC-Amarillo, Amarillo College).
What We Pour Commercially
- Warehouse and industrial slabs — 6″ to 8″ reinforced pours, saw-cut joints, sealed or hardened surfaces
- Retail pad sites — building slabs, sidewalks, parking lot concrete islands
- Service-bay slabs — auto/truck/RV service floors with trench drains, floor sealer, impact-resistant mix
- Oil-industry containment pads and berms — TCEQ-compliant liquid containment
- Equipment foundations — machine pads, generator slabs, HVAC pads
- Loading docks and truck aprons — 8″ pours, doweled joints, high early-strength mix
- Fuel islands and canopy foundations
- Parking lot concrete islands — median strips, curb islands, tenant-frontage sidewalks
Oil-Services Commercial (Panhandle Upside)
Carson County, Ochiltree, and the outlying oil-and-gas corridor drive real commercial-concrete demand. What we pour:
- Well-pad site concrete — engineered containment aprons around wellheads and separation equipment
- Tank battery containment berms — TCEQ Chapter 336 secondary containment for hydrocarbon storage
- Pipeline yard aprons — heavy-load concrete for pipe-storage yards and compressor stations
- Compressor station pads — vibration-designed slabs for reciprocating and centrifugal gas compression
- Service bay slabs at oil-and-gas service company facilities — pump-truck and coil-tubing service yards
Oil-services concrete pays a premium for scheduling responsiveness, safety compliance (Site-Specific Safety Plans on file, OSHA 10/30 as required, standard Chevron/ConocoPhillips/Pioneer orientations completed), and mix specifications that hold up to hydraulic fluid, drilling mud, and produced-water spills.
Mix Specifications
- Warehouse floors: 4,000–5,000 PSI, air-entrained if exterior, chemical hardener at final finish
- Service bay slabs: 4,500 PSI with high-abrasion aggregate, sealed with hydrocarbon-resistant epoxy
- Containment pads: 4,500 PSI with fiber reinforcement and chemical-resistant sealer
- Loading docks: 5,000 PSI, high early strength for tight turnaround
- Equipment foundations: engineer-specified, 4,000 PSI minimum
Slab Flatness
For warehouse work with rack systems, forklift traffic, or automated storage, floor flatness (F-numbers per ASTM E1155) affects operations. We work to specified F_F (floor flatness) and F_L (levelness) values called out in the contract documents. Laser-guided screed rentals are standard for pours over 15,000 sqft.
Joints, Cure, Timing, Pricing
- Construction joints — every 12–15 ft on warehouse floors, doweled with smooth #6 or #8 dowels on 12″ centers
- Saw-cut control joints — cut within 4–12 hours of finishing, depth = 1/4 slab thickness
- Isolation joints — around columns, at building perimeter, at any dissimilar structure
- Dowel baskets pre-set before pour. Plate-dowel systems for wider joints or diamond-shaped load transfer.
Curing and Sealing
Commercial slabs cure minimum 7 days under wet cover or curing compound. Sealer or hardener application: typically 14 days after pour for solvent-based sealers, 28 days for water-based. Densifier/hardener treatments (lithium silicate or sodium silicate) go down on days 14–28 to increase surface hardness 40–70%.
Scheduling
Commercial pours are scheduled around GC's master schedule, ready-mix availability, inspection cadence, and weather windows. We commit to a pour date only after we've confirmed mix load, pump/conveyor, and finishing crew availability.
Pricing (Amarillo commercial ranges)
| Application | Range |
|---|---|
| Warehouse floor | $6–$14/sqft turnkey |
| Retail pad site building slab | $8–$16/sqft engineered |
| Service bay slab (with epoxy + drains) | $12–$25/sqft |
| Oil-services containment pad | Quoted from drawings + TCEQ specs |
| Equipment foundation | $500–$5,000+ each |
Safety and Site Access
- OSHA 10/30 cards for crew on required sites
- COI on file for GC and end-owner
- Site-specific safety plans for oil-services work
- Random drug testing per site policy
- Full PPE at all times
Commercial FAQs
Can you handle a 30,000 sqft warehouse pour?
Yes, with proper scheduling and ready-mix coordination.
Do you work oil-and-gas facilities?
Yes, with the safety compliance those sites require.
Do you install trench drains?
Yes, in service-bay and shop slabs.
Fast turnaround on a small equipment pad?
Small pads (under 100 sqft) can quote same-week, pour next-week depending on curing needs.
Do you carry the insurance my GC requires?
Yes — COI naming the GC and end-owner as certificate holders on request.